Inhaltsverzeichnis   MOBOTIX Online-Hilfe Sprache: en  

Logo Profiles

The Logo Profile dialog is used to extend the image files that have been uploaded in the Manage Image Files dialog to a logo profile with the corresponding display options.

A logo profile is the combination of an image file and its positioning information in the camera image.

Logo Display

Select the desired option to either activate or deactivate the logo display in the camera image.

Profiles & Options

Note: Click on the More button to display all options for all profiles.

Set the following parameters in the Image Profiles dialog for each profile:

ParametersDescription
Logo n Enter a unique logo name. The camera will use this name for error messages.
Valid characters are letters, digits, dot, comma and underscore.
Enable Logo Using this switch, you can temporarily hide individual logos. Hidden logos remain stored and can be shown again later on.
Time Table Profile To show a logo time-controlled, you can select a Time Table.
Live Image Logo Using this option, you define whether or not the logo is displayed in the live image.
Image Link Logo Specify, whether or not the logo may be used for custom image formats. When you choose the setting force, the logo is displayed in every image and cannot be removed.
Image Sizes Highlight the allowed camera resolutions that may use this logo. The logo is only displayed in the image when it has been approved for this resolution.
Note: When you do not highlight any option, the logo is used with every resolution.
Logo Opacity Use this option to define how visible the logo is displayed within the camera image. Specifying the opacity value lower than 100% results in the actual camera image to shine through. If you would like to obtain a watermark effect, try setting the opacity to 20 to 30%.
Image List The image list contains all available Image Files. You may use one or multiple image files for a logo. When selecting several image files, they are displayed one at a time (rotated) at short intervals.
Rotation Interval Specify the interval for displaying the image files from the image list one at a time.
Positioning Mode The logo image files can be positioned in the camera image in two different ways. For each possibility, the alignment and offset information is interpreted differently.
  • Relative: The logo is positioned in the camera image relative to its alignment, the image size is not relevant.
  • Frame: The logo is drawn as frame around the entire camera image as described under Creating Frames later in this topic.
  Positioning: Relative Positioning: Frames
X/Y Alignment The logo is aligned relative to the camera image. Ignored
X/Y Offset Border offset from the aligned image border in dots. Size of the corner portions of the frame in dots. For additional information on this topic, see the Creating Frames help topic.

Deleting Profiles

In order to delete a profile, check the Delete option in the top right corner of the profile. The profile will be deleted as soon as you click on the Set button in the lower part of the dialog.


Creating Frames

Using an image file, you can draw a frame in the camera image. Make sure Positioning is set to Frame.

Corner
Upper/left
Edge piece top Corner
Upper/right
Edge piece left Unused. Edge piece right
Corner
Bottom/left
Edge bottom Corner
Bottom/right
Hint: It is recommended to create an image file with dimensions that can easily be divided by three, e.g. 90 x 90 pixels.

Frame File - Example

The sample file shown fulfills all prerequisites to be used as a frame:
  • Format: PNG
  • Size: 90 x 90 pixels
  • Shape: Square

To configure this image files as frame:

Adapt the frame's Opacity as desired.


Storing the Configuration

Click on the Set button to activate your settings and to save them until the camera is rebooted.

Click on the Close button to close the dialog. While closing the dialog, the system checks the entire configuration for changes. If changes are detected, you will be asked if you would like to store the entire configuration permanently.

Andere Sprachen: de, en

©2001-2024 MOBOTIX AG, Germany · http://www.mobotix.com/